扫码下载塑造APP
扫码下载塑造APP
Zytel®
PA66
FR50 NC010
Product information | |
---|---|
Manufacturer | Celanese Corporation |
Part Marking Code | |
Color | |
Material Shape | |
Process | |
FR | |
Material Attribute | |
specification | |
Features | |
Application | |
Additives | |
UL File NO. | |
Certificate |
Physical property | Standard | Value | Unit |
---|---|---|---|
Density | ISO 1183 | kg/m³ | |
Shrinkage Flow | ISO 294 | % | |
Shrinkage xFlow | ISO 294 | % | |
Humidity Absorption 2.00mm | ISO 62 | % | |
Relative Viscosity 96%H2SO4 VN | ISO 307 | cm³/g |
Mechanical behavior | Standard | Dry | Wet | Unit |
---|---|---|---|---|
Tensile Modulus | ISO 527 | MPa | ||
Tensile Strength Break | ISO 527 | MPa | ||
Elongation Break | ISO 527 | % | ||
Poisson Ratio | ISO 527 | |||
Charpy Notch Impact 23°C | ISO 179 | kJ/m² | ||
Charpy Notch Impact -30°C | ISO 179 | kJ/m² | ||
Charpy Notch Impact -40°C | ISO 179 | kJ/m² | ||
Charpy Un-notch Impact 23°C | ISO 179 | kJ/m² | ||
Charpy Un-notch Impact -30°C | ISO 179 | kJ/m² | ||
Charpy Un-notch Impact -40°C | ISO 179 | kJ/m² |
Thermal | Standard | Value | Unit |
---|---|---|---|
HDT 1.8MPa | ISO 75 | °C | |
Melting Temperature 10°C/min | ISO 11357 | °C | |
CLE xFlow -40.0~23°C | ISO 11359 | m/m/K | |
CLE xFlow 55~160°C | ISO 11359 | m/m/K | |
CLE Flow -40.0~23°C | ISO 11359 | m/m/K | |
CLE Flow 55~160°C | ISO 11359 | m/m/K |
Electrical properties | Standard | Dry | Wet | Unit |
---|---|---|---|---|
Volume Resistivity | IEC 62631 | Ω.m | ||
Surface Resistivity | IEC 62631-3-2 | Ω | ||
Dielectric Strength 2.0mm | IEC 60243 | KV/mm | ||
CTI | IEC 60112 | V |
Flammability | Standard | Value | Unit |
---|---|---|---|
Flame Rating All Color 0.35mm | UL94 | ||
Flame Rating All Color 0.75mm | UL94 | ||
Flame Rating NC BK 1.5mm | UL94 | ||
Flame Rating NC BK 3.0mm | UL94 |
UL | Standard | Value | Unit |
---|---|---|---|
UL FlameRating ALL 0.35mm | UL94 | ||
UL FlameRating ALL 0.75mm | UL94 | ||
HWI ALL 0.75mm | UL 746A | PLC | |
HAI ALL 0.75mm | UL 746A | PLC | |
RTI Elec ALL 0.75mm | UL 746B | °C | |
RTI Imp ALL 0.75mm | UL 746B | °C | |
RTI Str ALL 0.75mm | UL 746B | °C | |
UL FlameRating NC BK 1.5mm | UL94 | ||
HWI NC BK 1.5mm | UL 746A | PLC | |
HAI NC BK 1.5mm | UL 746A | PLC | |
RTI Elec NC BK 1.5mm | UL 746B | °C | |
RTI Imp NC BK 1.5mm | UL 746B | °C | |
RTI Str NC BK 1.5mm | UL 746B | °C | |
UL FlameRating NC BK 3.0mm | UL94 | ||
HWI NC BK 3.0mm | UL 746A | PLC | |
HAI NC BK 3.0mm | UL 746A | PLC | |
RTI Elec NC BK 3.0mm | UL 746B | °C | |
RTI Imp NC BK 3.0mm | UL 746B | °C | |
RTI Str NC BK 3.0mm | UL 746B | °C | |
Comparative Tracking Index | IEC 60112 | PLC | |
Dielectric Strength | ASTM D149 | KV/mm | |
Volume Resistivity | ASTM D257 | Ω.cm | |
HVTR | UL 746A | PLC | |
Arc Resistance | ASTM D495 | PLC | |
Outdoor Suitability | UL-746C | ||
GWFI 0.75mm | IEC 60695-2-12 | °C | |
GWFI 1.5mm | IEC 60695-2-12 | °C | |
GWFI 3.0mm | IEC 60695-2-12 | °C | |
GWIT 0.75mm | IEC 60695-2-13 | °C | |
GWIT 1.5mm | IEC 60695-2-13 | °C | |
GWIT 3.0mm | IEC 60695-2-13 | °C | |
Ball Pressure | IEC 60695-10-2 | °C |
Injection molding | Value | Unit |
---|---|---|
Dry Temperature | °C | |
Dry Time | hr | |
Water Content Control | % | |
Melt Temperature Optimum | °C | |
Min. Melt Temperature | °C | |
Max. Melt Temperature | °C | |
Mould Temperature | °C | |
Min. Mould Temperature | °C | |
Max. Mould Temperature | °C | |
Screw Speed | m/s | |
Holding Pressure | MPa | |
Hold Pressure Time | s/mm |
Disclaimer: [17Suzao] the data displayed on the data search platform of industrial materials is for the convenience of users, this data search platform shall not be responsible for the uncertainties and consequences caused by relevant information, such as brand, data, reference value and all other data and Suggestions.Therefore, if there is any doubt about the data, the users should confirm the reliability of the data with the manufacturer or purchaser before using the product.
请把您发现的问题反馈给我们,我们将尽快解决!
您的邮箱还未验证,点击发送验证邮件至您的邮箱
邮箱:{{userEmail}}
塞拉尼斯 Zytel® PA66 FR50 NC010物性表
您还未留邮箱,填写邮箱后使用该功能,