扫码下载塑造APP
扫码下载塑造APP
Zytel®
PA66
101L NC010
Product information | |
---|---|
Manufacturer | Celanese Corporation |
Part Marking Code | |
Color | |
Material Shape | |
Process | |
FR | |
Material Attribute | |
specification | |
Features | |
Additives | |
UL File NO. | |
Certificate |
Physical property | Standard | Value | Unit |
---|---|---|---|
Density | ISO 1183 | kg/m³ | |
Shrinkage Flow | ISO 294 | % | |
Shrinkage xFlow | ISO 294 | % | |
Water Absorption 2.00mm | ISO 62 | % | |
Water Absorption 24hr 1.00mm | ISO 62 | % | |
Humidity Absorption 2.00mm | ISO 62 | % | |
Melt Index | ISO 1133 | g/10min | |
Viscosity Number 96% H₂SO₄ | ISO 307 | cm³/g | |
Melt Density | ISO 1183 | kg/m³ |
Hardness | Standard | Dry | Wet | Unit |
---|---|---|---|---|
Rockwell Hardness M(Scale) | ISO 2039 | |||
Rockwell Hardness R(Scale) | ISO 2039 | |||
Ball Indentation Hardness H358/30 | ISO 2039 | MPa | ||
Ball Indentation Hardness H961/30 | ISO 2039 | MPa |
Mechanical behavior | Standard | Dry | Wet | Unit |
---|---|---|---|---|
Tensile Modulus | ISO 527 | MPa | ||
Tensile Strength Yield | ISO 527 | MPa | ||
Elongation Yield | ISO 527 | % | ||
Elongation Break | ISO 527 | % | ||
Elongation Break 23°C 50mm/min | ISO 527 | % | ||
Elongation Flow Yield | ISO 527 | % | ||
Poisson Ratio | ISO 527 | |||
Tensile Creep Modulus 1hr | ISO 899 | MPa | ||
Tensile Creep Modulus 1000hr | ISO 899 | MPa | ||
Flexural Strength | ISO 178 | MPa | ||
Flexural Modulus | ISO 178 | MPa | ||
Izod Notch Impact 23°C | ISO 180 | kJ/m² | ||
Izod Notch Impact -30°C | ISO 180 | kJ/m² | ||
Izod Notch Impact -40°C | ISO 180 | kJ/m² | ||
Izod Un-notch Impact 23°C | ISO 180 | kJ/m² | ||
Izod Un-notch Impact -30°C | ISO 180 | kJ/m² | ||
Charpy Notch Impact 23°C | ISO 179 | kJ/m² | ||
Charpy Notch Impact -30°C | ISO 179 | kJ/m² | ||
Charpy Un-notch Impact 23°C | ISO 179 | kJ/m² | ||
Charpy Un-notch Impact -30°C | ISO 179 | kJ/m² |
Thermal | Standard | Value | Unit |
---|---|---|---|
HDT 1.8MPa | ISO 75 | °C | |
HDT 0.45MPa | ISO 75 | °C | |
Vicat Softening Temperature 50°C/hr 50N | ISO 306 | °C | |
Melting Temperature 10°C/min | ISO 11357 | °C | |
Glass Transition Temperature 10°C/min | ISO 11357 | °C | |
CLE Flow | ISO 11359 | m/m/K | |
CLE xFlow | ISO 11359 | m/m/K | |
Heat Conductivity Coefficient Soid | INTERNAL METHOD | W/(m·K) | |
Heat Conductivity Coefficient Melt | INTERNAL METHOD | W/(m·K) | |
Specific Heat Melt | INTERNAL METHOD | J/(kg·K) | |
Specific Heat Soid | INTERNAL METHOD | J/(kg·K) | |
Thermal Diffusivity | INTERNAL METHOD | m²/s |
Electrical properties | Standard | Dry | Wet | Unit |
---|---|---|---|---|
Volume Resistivity | IEC 62631 | Ω.m | ||
Dielectric Strength | IEC 60243 | KV/mm | ||
Dielectric Constant 100Hz | IEC 62631-2-1 | |||
Dielectric Constant 1MHz | IEC 62631-2-1 | |||
Dissipation Factor 100Hz | IEC 62631-2-1 | |||
Dissipation Factor 1MHz | IEC 62631-2-1 | |||
CTI | IEC 60112 | V | ||
CTI M | IEC 60112 | V | ||
CTI Rating | UL 746A | PLC |
Flammability | Standard | Value | Unit |
---|---|---|---|
GWIT 0.75mm | IEC 60695 | °C | |
GWIT 1.5mm | IEC 60695 | °C | |
GWIT 3mm | IEC 60695 | °C | |
GWFI 0.75mm | IEC 60695 | °C | |
GWFI 1.5mm | IEC 60695 | °C | |
GWFI 3mm | IEC 60695 | °C | |
Flame Rating All Color 0.71mm | UL94 | ||
Flame Rating All Color 1.5mm | UL94 | ||
Flame Rating All Color 3.0mm | UL94 | ||
Flame Rating All Color 6.0mm | UL94 | ||
Limiting Oxygen Index | ISO 4589 | % | |
FMVSS Class | ISO 3795 |
VDA Properties | Standard | Value | Unit |
---|---|---|---|
Emission of organic compounds | VDA 277 | μg/g | |
Fogging G-value Condensate | ISO 6452 | mg | |
Odour | VDA 270 | class |
UL | Standard | Value | Unit |
---|---|---|---|
UL FlameRating ALL 0.71mm | UL94 | ||
HWI ALL 0.71mm | UL 746A | PLC | |
HAI ALL 0.71mm | UL 746A | PLC | |
RTI Elec ALL 0.71mm | UL 746B | °C | |
RTI Imp ALL 0.71mm | UL 746B | °C | |
RTI Str ALL 0.71mm | UL 746B | °C | |
UL FlameRating ALL 1.5mm | UL94 | ||
HWI ALL 1.5mm | UL 746A | PLC | |
HAI ALL 1.5mm | UL 746A | PLC | |
RTI Elec ALL 1.5mm | UL 746B | °C | |
RTI Imp ALL 1.5mm | UL 746B | °C | |
RTI Str ALL 1.5mm | UL 746B | °C | |
UL FlameRating ALL 3.0mm | UL94 | ||
HWI ALL 3.0mm | UL 746A | PLC | |
HAI ALL 3.0mm | UL 746A | PLC | |
RTI Elec ALL 3.0mm | UL 746B | °C | |
RTI Imp ALL 3.0mm | UL 746B | °C | |
RTI Str ALL 3.0mm | UL 746B | °C | |
UL FlameRating ALL 6.0mm | UL94 | ||
HWI ALL 6.0mm | UL 746A | PLC | |
HAI ALL 6.0mm | UL 746A | PLC | |
RTI Elec ALL 6.0mm | UL 746B | °C | |
RTI Imp ALL 6.0mm | UL 746B | °C | |
RTI Str ALL 6.0mm | UL 746B | °C | |
Comparative Tracking Index | IEC 60112 | PLC | |
Dielectric Strength | ASTM D149 | KV/mm | |
Volume Resistivity | ASTM D257 | Ω.cm | |
HVTR | UL 746A | PLC | |
Arc Resistance | ASTM D495 | PLC | |
Outdoor Suitability | UL-746C | ||
GWFI 0.71mm | IEC 60695-2-12 | °C | |
GWFI 1.5mm | IEC 60695-2-12 | °C | |
GWFI 3.0mm | IEC 60695-2-12 | °C | |
GWFI 6.0mm | IEC 60695-2-12 | °C | |
GWIT 0.71mm | IEC 60695-2-13 | °C | |
GWIT 1.5mm | IEC 60695-2-13 | °C | |
GWIT 3.0mm | IEC 60695-2-13 | °C | |
GWIT 6.0mm | IEC 60695-2-13 | °C | |
Ball Pressure | IEC 60695-10-2 | °C |
Injection molding | Value | Unit |
---|---|---|
Dry Temperature | °C | |
Dry Time | hr | |
Water Content Control | % | |
Melt Temperature Optimum | °C | |
Min. Melt Temperature | °C | |
Max. Melt Temperature | °C | |
Mould Temperature | °C | |
Min. Mould Temperature | °C | |
Max. Mould Temperature | °C | |
Screw Speed | m/s | |
Holding Pressure | MPa | |
Hold Pressure Time | s/mm | |
Ejection Temperature | °C |
Disclaimer: [17Suzao] the data displayed on the data search platform of industrial materials is for the convenience of users, this data search platform shall not be responsible for the uncertainties and consequences caused by relevant information, such as brand, data, reference value and all other data and Suggestions.Therefore, if there is any doubt about the data, the users should confirm the reliability of the data with the manufacturer or purchaser before using the product.
请把您发现的问题反馈给我们,我们将尽快解决!
您的邮箱还未验证,点击发送验证邮件至您的邮箱
邮箱:{{userEmail}}
塞拉尼斯 Zytel® PA66 101L NC010物性表
您还未留邮箱,填写邮箱后使用该功能,