申请成为商家
扫码下载塑造APP
{{compareList.length}}
Delrin®
POM
500P NC010
| Product information | |
|---|---|
| Manufacturer | DuPont Performance Polymers |
| Part Marking Code | |
| Color | |
| Material Shape | |
| Process | |
| Polymer | |
| Viscosity | |
| FR | |
| Material Attribute | |
| specification | |
| Features | |
| Additives | |
| UL File NO. | |
| Certificate |
|
| Physical property | Standard | Value | Unit |
|---|---|---|---|
| Density | ISO 1183 | kg/m³ | |
| Shrinkage Flow | ISO 294 | % | |
| Shrinkage xFlow | ISO 294 | % | |
| Water Absorption 2.00mm | ISO 62 | % | |
| Humidity Absorption 2.00mm | ISO 62 | % | |
| Melt Index 190°C 2.16kg | ISO 1133 | cm³/10min | |
| Melt Index 190°C 2.16kg | ISO 1133 | g/10min | |
| Melt Density | INTERNAL METHOD | kg/m³ |
| Hardness | Standard | Value | Unit |
|---|---|---|---|
| Rockwell Hardness M(Scale) | ISO 2039 | ||
| Rockwell Hardness R(Scale) | ISO 2039 | ||
| Ball Indentation Hardness H358/30 | ISO 2039 | MPa | |
| Ball Indentation Hardness H961/30 | ISO 2039 | MPa |
| Mechanical behavior | Standard | Value | Unit |
|---|---|---|---|
| Tensile Modulus | ISO 527 | MPa | |
| Tensile Strength Yield | ISO 527 | MPa | |
| Elongation Yield | ISO 527 | % | |
| Elongation Break | ISO 527 | % | |
| Poisson Ratio | INTERNAL METHOD | ||
| Tensile Creep Modulus 1hr | ISO 899 | MPa | |
| Tensile Creep Modulus 1000hr | ISO 899 | MPa | |
| Flexural Strength 3.5%Strain | ISO 178 | MPa | |
| Flexural Modulus | ISO 178 | MPa | |
| Izod Notch Impact 23°C Type A | ISO 180 | kJ/m² | |
| Izod Notch Impact -30°C Type A | ISO 180 | kJ/m² | |
| Izod Un-notch Impact 23°C | ISO 180 | kJ/m² | |
| Izod Un-notch Impact -30°C | ISO 180 | kJ/m² | |
| Charpy Notch Impact 23°C 1eA | ISO 179 | kJ/m² | |
| Charpy Notch Impact -30°C 1eA | ISO 179 | kJ/m² | |
| Charpy Notch Impact -40°C 1eA | ISO 179 | kJ/m² | |
| Charpy Un-notch Impact 23°C | ISO 179 | kJ/m² | |
| Charpy Un-notch Impact -30°C | ISO 179 | kJ/m² | |
| Puncture Resistance Maximum Force 23°C | ISO 6603 | N | |
| Puncture Resistance Energy 23°C | ISO 6603 | J |
| Thermal | Standard | Value | Unit |
|---|---|---|---|
| HDT 1.8MPa | ISO 75 | °C | |
| HDT Annealed 1.8MPa | ISO 75 | °C | |
| HDT 0.45MPa | ISO 75 | °C | |
| Vicat Softening Temperature 50°C/hr 50N | ISO 306 | °C | |
| Melting Temperature 10°C/min | ISO 11357 | °C | |
| CLE Flow | ISO 11359 | m/m/K | |
| CLE xFlow | ISO 11359 | m/m/K | |
| CLE xFlow -40.0~23°C | ISO 11359 | m/m/K | |
| CLE Flow -40.0~23°C | ISO 11359 | m/m/K | |
| Heat Conductivity Coefficient Melt | INTERNAL METHOD | W/(m·K) | |
| Thermal Diffusivity | INTERNAL METHOD | m²/s |
| Electrical properties | Standard | Value | Unit |
|---|---|---|---|
| Volume Resistivity | IEC 62631 | Ω.m | |
| Surface Resistivity | IEC 62631-3-2 | Ω | |
| Dielectric Strength | IEC 60243 | KV/mm | |
| Dielectric Constant 100Hz | IEC 62631-2-1 | ||
| Dielectric Constant 1MHz | IEC 62631-2-1 | ||
| Dissipation Factor 100Hz | IEC 62631-2-1 | ||
| Dissipation Factor 1MHz | IEC 62631-2-1 | ||
| CTI | IEC 60112 | V |
| Flammability | Standard | Value | Unit |
|---|---|---|---|
| GWFI 1mm | IEC 60695 | °C | |
| GWFI 2mm | IEC 60695 | °C | |
| GWFI 3mm | IEC 60695 | °C | |
| Flame Rating All Color 0.75mm | UL94 | ||
| Flame Rating All Color 1.5mm | UL94 | ||
| Flame Rating All Color 3.0mm | UL94 | ||
| Limiting Oxygen Index | ISO 4589 | % | |
| Burning Rate 1.00mm | ISO 3795 | mm/min |
| VDA Properties | Standard | Value | Unit |
|---|---|---|---|
| Emission | VDA 275 | mg/kg | |
| Fogging F-value Refraction | ISO 6452 | % | |
| Fogging G-value Condensate | ISO 6452 | mg |
| UL | Standard | Value | Unit |
|---|---|---|---|
| UL FlameRating ALL 0.75mm | UL94 | ||
| HWI ALL 0.75mm | UL 746A | PLC | |
| HAI ALL 0.75mm | UL 746A | PLC | |
| RTI Elec ALL 0.75mm | UL 746B | °C | |
| RTI Imp ALL 0.75mm | UL 746B | °C | |
| RTI Str ALL 0.75mm | UL 746B | °C | |
| UL FlameRating ALL 1.5mm | UL94 | ||
| HWI ALL 1.5mm | UL 746A | PLC | |
| HAI ALL 1.5mm | UL 746A | PLC | |
| RTI Elec ALL 1.5mm | UL 746B | °C | |
| RTI Imp ALL 1.5mm | UL 746B | °C | |
| RTI Str ALL 1.5mm | UL 746B | °C | |
| UL FlameRating ALL 3.0mm | UL94 | ||
| HWI ALL 3.0mm | UL 746A | PLC | |
| HAI ALL 3.0mm | UL 746A | PLC | |
| RTI Elec ALL 3.0mm | UL 746B | °C | |
| RTI Imp ALL 3.0mm | UL 746B | °C | |
| RTI Str ALL 3.0mm | UL 746B | °C | |
| Comparative Tracking Index | IEC 60112 | PLC | |
| HVTR | UL 746A | PLC | |
| Arc Resistance | ASTM D495 | PLC |
| Injection molding | Value | Unit |
|---|---|---|
| Dry Temperature | °C | |
| Dry Time | hr | |
| Water Content Control | % | |
| Melt Temperature Optimum | °C | |
| Min. Melt Temperature | °C | |
| Max. Melt Temperature | °C | |
| Mould Temperature | °C | |
| Min. Mould Temperature | °C | |
| Max. Mould Temperature | °C | |
| Holding Pressure | MPa | |
| Hold Pressure Time | s/mm | |
| Annealing Time | min/mm | |
| Annealing Temperature | °C |
Disclaimer: [17Suzao] the data displayed on the data search platform of industrial materials is for the convenience of users, this data search platform shall not be responsible for the uncertainties and consequences caused by relevant information, such as brand, data, reference value and all other data and Suggestions.Therefore, if there is any doubt about the data, the users should confirm the reliability of the data with the manufacturer or purchaser before using the product.
{{item.title}}
{{item.title}}
您的体验查看次数已用完
扫码关注，获取免费浏览物性表权益
打开微信扫码关注公众号
请把您发现的问题反馈给我们，我们将尽快解决！
将文件拖到此处，或点击上传
只能上传jpg/png文件，且不超过500kb
您的邮箱还未验证，点击发送验证邮件至您的邮箱
邮箱：{{userEmail}}
杜邦 Delrin® POM 500P NC010物性表
- UL
您还未留邮箱，填写邮箱后使用该功能,