扫码下载塑造APP
扫码下载塑造APP
Zytel®
PA66
70G33L NC010
Product information | |
---|---|
Manufacturer | Celanese Corporation |
Other Certificates | |
Part Marking Code | |
Color | |
Material Shape | |
Process | |
FR | |
Material Attribute | |
specification | |
Features | |
Additives | |
UL File NO. | |
Certificate |
Physical property | Standard | Value | Unit |
---|---|---|---|
Density | ISO 1183 | kg/m³ | |
Shrinkage Flow | ISO 294 | % | |
Shrinkage xFlow | ISO 294 | % | |
Water Absorption 2.00mm | ISO 62 | % | |
Water Absorption 24hr In Water | ISO 62 | % | |
Humidity Absorption 2.00mm | ISO 62 | % | |
Viscosity Number | ISO 307 | cm³/g |
Hardness | Standard | Value | Unit |
---|---|---|---|
Rockwell Hardness M(Scale) | ISO 2039 |
Mechanical behavior | Standard | Dry | Wet | Unit |
---|---|---|---|---|
Tensile Modulus | ISO 527 | MPa | ||
Tensile Strength Break | ISO 527 | MPa | ||
Elongation Break | ISO 527 | % | ||
Poisson Ratio | INTERNAL METHOD | |||
Tensile Creep Modulus 1hr | ISO 899 | MPa | ||
Tensile Creep Modulus 1000hr | ISO 899 | MPa | ||
Flexural Strength | ISO 178 | MPa | ||
Flexural Modulus | ISO 178 | MPa | ||
Izod Notch Impact 23°C | ISO 180 | kJ/m² | ||
Izod Notch Impact -30°C | ISO 180 | kJ/m² | ||
Izod Notch Impact -40°C | ISO 180 | kJ/m² | ||
Izod Un-notch Impact 23°C | ISO 180 | kJ/m² | ||
Izod Un-notch Impact -30°C | ISO 180 | kJ/m² | ||
Charpy Notch Impact 23°C 1eA | ISO 179 | kJ/m² | ||
Charpy Notch Impact -30°C 1eA | ISO 179 | kJ/m² | ||
Charpy Notch Impact -40°C 1eA | ISO 179 | kJ/m² | ||
Charpy Un-notch Impact 23°C | ISO 179 | kJ/m² | ||
Charpy Un-notch Impact -30°C | ISO 179 | kJ/m² | ||
Abrasion Resistance | ISO 4649 | mm³ | ||
Shearing Strength | ASTM D732 | MPa | ||
Compressive Strength | ISO 604 | MPa |
Thermal | Standard | Value | Unit |
---|---|---|---|
HDT 1.8MPa | ISO 75 | °C | |
HDT 0.45MPa | ISO 75 | °C | |
Melting Temperature 10°C/min | ISO 11357 | °C | |
Glass Transition Temperature 10°C/min | ISO 11357 | °C | |
CLE Flow | ISO 11359 | m/m/K | |
CLE xFlow | ISO 11359 | m/m/K | |
CLE xFlow -40.0~23°C | ISO 11359 | m/m/K | |
CLE xFlow 55~160°C | ISO 11359 | m/m/K | |
CLE Flow -40.0~23°C | ISO 11359 | m/m/K | |
CLE Flow 55~160°C | ISO 11359 | m/m/K | |
Heat Conductivity Coefficient Melt | INTERNAL METHOD | W/(m·K) | |
Specific Heat Melt | INTERNAL METHOD | J/(kg·K) | |
Specific Heat Soid | INTERNAL METHOD | J/(kg·K) |
Electrical properties | Standard | Value | Unit |
---|---|---|---|
Volume Resistivity | IEC 62631 | Ω.m | |
Dielectric Constant 100Hz | IEC 62631-2-1 | ||
Dielectric Constant 1MHz | IEC 62631-2-1 | ||
Dissipation Factor 100Hz | IEC 62631-2-1 | ||
Dissipation Factor 1MHz | IEC 62631-2-1 | ||
CTI | IEC 60112 | V |
Flammability | Standard | Value | Unit |
---|---|---|---|
Flame Rating All Color 0.71mm | UL94 | ||
Flame Rating All Color 1.5mm | UL94 | ||
Flame Rating All Color 3.0mm | UL94 | ||
Limiting Oxygen Index | ISO 4589 | % | |
Burning Rate 1.00mm | ISO 3795 | mm/min |
VDA Properties | Standard | Value | Unit |
---|---|---|---|
Emission of organic compounds | VDA 277 | μg/g | |
Fogging F-value Refraction | ISO 6452 | % | |
Fogging G-value Condensate | ISO 6452 | mg | |
Odour | VDA 270 | class |
UL | Standard | Value | Unit |
---|---|---|---|
UL FlameRating ALL 0.71mm | UL94 | ||
HWI ALL 0.71mm | UL 746A | PLC | |
HAI ALL 0.71mm | UL 746A | PLC | |
RTI Elec ALL 0.71mm | UL 746B | °C | |
RTI Imp ALL 0.71mm | UL 746B | °C | |
RTI Str ALL 0.71mm | UL 746B | °C | |
UL FlameRating ALL 1.5mm | UL94 | ||
HWI ALL 1.5mm | UL 746A | PLC | |
HAI ALL 1.5mm | UL 746A | PLC | |
RTI Elec ALL 1.5mm | UL 746B | °C | |
RTI Imp ALL 1.5mm | UL 746B | °C | |
RTI Str ALL 1.5mm | UL 746B | °C | |
UL FlameRating ALL 3.0mm | UL94 | ||
HWI ALL 3.0mm | UL 746A | PLC | |
HAI ALL 3.0mm | UL 746A | PLC | |
RTI Elec ALL 3.0mm | UL 746B | °C | |
RTI Imp ALL 3.0mm | UL 746B | °C | |
RTI Str ALL 3.0mm | UL 746B | °C | |
Comparative Tracking Index | IEC 60112 | PLC | |
Dielectric Strength | ASTM D149 | KV/mm | |
Volume Resistivity | ASTM D257 | Ω.cm | |
HVTR | UL 746A | PLC | |
Dimensional Stability | UL746 | % | |
Arc Resistance | ASTM D495 | PLC |
Injection molding | Value | Unit |
---|---|---|
Dry Temperature | °C | |
Dry Time | hr | |
Water Content Control | % | |
Melt Temperature Optimum | °C | |
Min. Melt Temperature | °C | |
Max. Melt Temperature | °C | |
Mould Temperature | °C | |
Min. Mould Temperature | °C | |
Max. Mould Temperature | °C | |
Screw Speed | m/s | |
Holding Pressure | MPa | |
Hold Pressure Time | s/mm | |
Ejection Temperature | °C |
Disclaimer: [17Suzao] the data displayed on the data search platform of industrial materials is for the convenience of users, this data search platform shall not be responsible for the uncertainties and consequences caused by relevant information, such as brand, data, reference value and all other data and Suggestions.Therefore, if there is any doubt about the data, the users should confirm the reliability of the data with the manufacturer or purchaser before using the product.
请把您发现的问题反馈给我们,我们将尽快解决!
您的邮箱还未验证,点击发送验证邮件至您的邮箱
邮箱:{{userEmail}}
塞拉尼斯 Zytel® PA66 70G33L NC010物性表
您还未留邮箱,填写邮箱后使用该功能,